Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Gloucester Point, VA
Chimney inspection in Gloucester Point is the first thing we recommend to anyone heating with wood here, because the conditions on the Point are hard on masonry. Salt air off the York River works into brick and mortar, and nor’easters push moisture into chimneys that haven’t been capped properly. Many homes along the riverfront started without a chimney at all, and the flue added later often hides rot or bad flashing behind it. We handle sweeping, repair, and inspection as one job, with the materials to match. Call (833) 572-0756 to book.
Why Gloucester Point Homes Are Different
Gloucester Point sits right on the York River, and that changes what we find inside a flue. Salt-laden air speeds up rust on dampers and eats at mortar joints, especially on homes facing the water. The humid subtropical climate here means hot summers and mild winters, so fireplaces get used on and off rather than steadily, which lets creosote build without the hot burns that would keep it down. Add nor’easters and you get wind-driven rain, missing caps, and nesting debris packed into flues on the older riverfront blocks.
The housing stock splits cleanly. Mid-century brick ranches often have unlined or clay-tile flues that eventually need relining, while newer waterfront custom homes tend to have prefab metal chimneys that take different brushes and a gentler hand. Many of the older properties had chimneys added onto original structures, so we look closely at where the chimney meets the roof for hidden rot and improper flashing. A chimney that looks sound from the ground can be a very different story from the top.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Gloucester Point Services
Most calls from Gloucester Point come down to two things: a chimney that needs sweeping before the heating season, or damage that needs fixing before it gets worse.
Chimney Sweep in Gloucester Point
Routine sweeping in Gloucester Point means removing creosote, soot, and whatever the last storm left behind. On the Point’s older riverfront homes, that often includes salt corrosion around the damper and debris under a cap that’s missing or bent by wind. We brush according to flue type, because a prefab metal chimney in a newer waterfront house takes different tools than a clay-tile flue in a mid-century ranch. You get a camera look at what came out and what’s left. To book a Chimney Sweep in Gloucester Point, call and we’ll find you a slot.

Chimney Repair in Gloucester Point
Repair work here leans on moisture damage: cracked mortar crowns, rusted dampers, failing flashing where the chimney meets the roof, and caps torn loose by nor’easters. Coastal humidity makes all of it worse on river-facing homes. Where mortar joints inside the flue have deteriorated but the liner is otherwise sound, HeatShield resurfacing can rebuild that surface without pulling the whole liner. When a flue is unlined or beyond resurfacing, a DuraFlex liner system is the route. For Chimney Repair in Gloucester Point, we diagnose with a camera first, then quote the fix in writing.

Chimney Inspection in Gloucester Point
Chimney inspection in Gloucester Point has to account for two very different kinds of chimney: the unlined or clay-tile flues in mid-century brick ranches and the prefab metal chimneys in newer waterfront construction. Coastal humidity and salt air shorten the life of dampers, mortar, and caps on river-facing homes, so an inspection here is as much about finding corrosion and water intrusion as it is about creosote. That’s why we treat Chimney Inspection as the starting point for every other job. Nothing gets recommended until we’ve seen it on camera and can show you the footage.
Fireplace Inspection
Signs you need it
You’re seeing smoke spill into the room, the damper sticks or won’t seal, or the firebox brick shows cracks or crumbling mortar.
What it costs in Gloucester Point
A fireplace inspection typically runs $125 to $250, and if it’s combined with a sweep the whole visit usually lands between $180 and $340.
How we do it
We check the firebox brick and mortar, test the damper through its full travel, look at the smoke chamber and damper shelf, and run a camera up the flue to confirm the liner is intact.
Chimney Flue Inspection
Signs you need it
Creosote is visible at the top of the firebox, the flue hasn’t been looked at in a few seasons, or you’ve noticed a sour, smoky smell in the house on humid days.
What it costs in Gloucester Point
A flue inspection is typically $125 to $250 on its own, or included with a sweep at $180 to $340.
How we do it
We run a camera the full length of the flue, measure the creosote stage, check for cracked tiles or gaps at the joints, and photograph anything that needs attention so you can see it yourself.
What Chimney Inspection Costs in Gloucester Point
| Item | Typical range in Gloucester Point |
|---|---|
| Level 2 chimney inspection | $200 – $450 |
| Chimney sweep with inspection | $180 – $340 |
| Camera inspection and photo report | $125 – $250 |
How often should a Gloucester Point chimney be inspected?
Once a year, and always before you start burning for the season. Intermittent use in this climate lets creosote build without hot burns clearing it, so annual inspection catches problems early. Call (833) 572-0756 for an exact quote – estimates are free.
Do I need a Level 2 inspection or is a basic check enough?
A Level 2 inspection is the right call when a chimney has changed, a home has changed hands, or storm damage is suspected – common on the Point’s older riverfront blocks. It includes a camera look at the entire flue. Call (833) 572-0756 to book one.
Brands We Service in Gloucester Point
We work with a set of professional-grade brands rather than whatever’s on the shelf: DuraFlex for liner systems, HeatShield for flue resurfacing, Gelco for caps and venting, and Olympia Chimney for components. Knowing these products well means the right part gets matched to your chimney the first time. You can see the full lineup on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Gloucester Point, VA
| Service | Typical range in Gloucester Point |
|---|---|
| Chimney sweep with inspection | $180 – $340 |
| Level 2 chimney inspection | $200 – $450 |
| Camera inspection and photo report | $125 – $250 |
| Chimney cap replacement | $150 – $400 |
| Crown repair | $300 – $800 |
| Flashing repair | $250 – $650 |
| Damper repair or replacement | $250 – $700 |
| HeatShield flue resurfacing | $1,200 – $2,800 |
| DuraFlex liner installation | $2,500 – $6,000 |
Prices on the Point climb with height and access, river-facing corrosion that turns a small repair into a bigger one, and flue length on taller chimneys. Whatever we find, you get the number in writing before any work starts, and the written estimate is the final price.
Neighborhoods We Serve in Gloucester Point
We work across Gloucester Point and the surrounding waterfront, from 23062 out toward the county line. Homes on the older riverfront blocks and the mid-century ranches set back from the water both come up in our schedule, and each brings its own inspection priorities. When you call, we’ll confirm the address and get you booked into the next opening, Sunday through Friday.
- Riverfront blocks along the York
- Older Point neighborhoods near the ferry landing
- Mid-century brick ranches off the main roads
- Newer waterfront custom homes
Service Area – Cities Near Gloucester Point
Gloucester Point sits close to several communities we cover, and the same coastal conditions apply across most of them. If you’re nearby, we can help in Newport News, VA, Williamsburg, VA, Mathews, VA, and Hampton, VA. Wherever you are on this side of the water, the call is the same: we answer, we book, and we show you what we find.
Serving Gloucester Point, VA – Our Local Coverage Area
We serve Gloucester Point and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Gloucester Point
We answer 24/7 and dispatch Sunday through Friday, 7am to 7pm. Most Gloucester Point bookings land within a few days, sooner in the off-season. Call (833) 572-0756 and we’ll confirm the next opening for your address.
Some repairs require a permit through Gloucester County, and relining or structural work usually does. Check with the county building department before work starts. We’ll tell you what we’ve seen on similar jobs and what the written estimate covers.
Yes, we serve Gloucester Point and the surrounding York River waterfront, including 23062. If you’re just outside the county line, call and we’ll confirm whether your address is in range before booking.
Ready to know what’s inside your chimney? Call (833) 572-0756 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Gloucester Point Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
- Devon Grant"Good experience overall. The only thing I'd change is the cleanup, there was a bit of debris left in the driveway. Minor, and the repair itself was done well."
- Greg Fletcher"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Brandon Lin